Program Mixer - Akai MPC TOUCH User Manual

Program Mixer

The program mixer shows levels,
panning, mute states, send and insert
effects, and routing for all used tracks.
To view a specific setting on all
programs, tap the Level, Pan, Mute,
Send, Insert, or Route button on the
bottom edge of the touchscreen. You
can tap the Send or Insert buttons
multiple times to cycle through the four
available slots for each.
When a program is selected, you can view and adjust all of its settings in the left side of the touchscreen
rather than using the tab buttons at the bottom edge.
When viewing the program channel strip:
Note: This is the same as the program channel strip in Main Mode.
•
The first field shows the current program number and name, which you can change.
•
The second field shows where the program is routed, which you can change.
•
The Inserts field shows any enabled or disabled effects for that program. Tap the pencil icon to
open a window where you can change and enable or disable the effects.
•
To solo or mute the program, tap Solo or Mute (respectively).
248