Akai MPC TOUCH User Manual page 255

Each used sequence is assigned to a pad. Empty pads correspond to
unused sequences. You can use the Pad Bank buttons to access the
sequences assigned to pads in other banks.
To insert a step:
1. Tap a step in the sequence playlist after which you want to insert a step.
2. Tap Insert in the lower-right corner of the touchscreen.
To change a step's sequence:
1. In the desired step, tap the sequence name.
2. Use the Data Dial or –/+ buttons to select another sequence.
To delete a step, tap it, and then tap Delete in the lower-right corner of the touchscreen.
To clear the entire sequence playlist (delete all steps), tap Clear.
To convert the current song to a single sequence:
1. Tap Convert > Seq to open the Convert to Sequence window.
2. Use the To Sequence field to select which sequence you want the song to export to.
3. Use the Track Status field to select whether you want the song to Ignore Muted Tracks or Include
Muted Tracks in the new sequence.
4. To confirm your selections, tap Do It.
To cancel the process, tap Close.
255