Akai MPC TOUCH User Manual page 212

A low-frequency oscillator (LFO) generates a periodic waveform with an adjustable frequency and shape
which can be used for modulation purposes.
Use the Wave field to select the LFO waveform type:
•
Triangle (best suited for smooth modulations)
•
Sine (best suited for smooth modulations)
•
Square (interesting results with hard-panning modulations)
•
Saw (can generate interesting filter or volume changes)
•
Saw Down (can generate interesting filter or volume changes)
•
Noise (generates random values and glides)
•
S&H (samples a random value and holds it until the next value is generated)
Use the Rate field to determine the LFO frequency when Sync is on. At lower values, it might take some
time for the LFO to complete a cycle, while higher values will come closer to audible range.
Use the Sync field to set whether the LFO's rate is synchronized with the tempo. When None is
selected, Sync is off.
Use the Destinations sliders to determine how much the LFO affects the Pitch, Filter Cutoff frequency
(Filter), Volume (Amp) and Panning (Pan).
212