To load a sample into a drum program:
1. Tap Shift+Menu/Browse to show the Browser. Find and select a sample, and then tap Load to load
it to the program. (See
2. Tap Samples at the bottom of the touchscreen. This lets you view the pads and project's sample pool.
3. Tap a pad to select it. The pad will be lit green.
4. In the Sample Pool list, double-tap a sample to assign it to the pad. Alternatively, use the Data Dial
or –/+ buttons to assign a sample and/or change the assigned sample.
To clear the assigned sample from a selected pad, press the Data Dial.
To assign samples to additional pads, repeat Steps 3–4.
Viewing files in the Browser.
Tip: Remember that a drum program has 128 pads total—16 pads across 8 banks.
Modes > Browser
to learn more about using the Browser specifically.)
The Samples tab in the Browser.
62