Akai MPC TOUCH User Manual page 145

Use the MPC Touch pads (any bank) to play certain parts of the
selected sample:
•
Play Loop (Pad 13) plays the sample repeatedly from the
loop point to the end point.
•
Play Sample (One Shot) (Pad 10) plays the whole sample
as it has been edited. Press the pad once to play it.
•
Play Sample (Note On) (Pad 11) plays the whole sample
as it has been edited. Press and hold the pad to play it.
Release the pad to stop playing it.
Alternatively, select the headphones icon in the upper-right
corner, and then tap and hold your finger on the waveform.
•
Play All (Pad 16) plays the sample region between the loop
point to the end point.
•
Play to Loop Start (Pad 14) plays the sample region before the loop point.
•
Play from Loop Start (Pad 15) plays the sample from the loop point to the end of the sample
regardless of the end point.
Pads 1–4 have the same respective functions as Pads 5–8, but Pads 1–4 play the sample part as "One
Shots" (pressing the pad once will play the entire part) while Pads 5–8 play the sample part as "Note
Ons" (pressing the pad and holding it will play the part; releasing it will stop playback):
•
Play from Start (Pad 1 and Pad 5) plays the sample from the start point to the end of the sample
regardless of the end point.
•
Play to Start (Pad 2 and Pad 6) plays the sample portion before the start point.
•
Play to End (Pad 3 and Pad 7) plays the sample portion from the start point to the end point.
•
Play from End (Pad 4 and Pad 8) plays the sample part from the end point to the end of the
sample.
145