Akai MPC TOUCH User Manual page 239

To play or stop the loop (without recording), tap the /Play button on the touchscreen.
To reverse loop playback, tap Reverse. If Sync is on, playback will reverse once the Looper's
playhead reaches the end of the loop. If Sync is off, playback will reverse immediately.
To erase the loop immediately, tap Clear.
To export the loop as a sample:
1. Tap Export to open the Export Loop as a Sample window.
2. Tap the Edit Name field and use the virtual keyboard that appears to enter a new name.
3. Optional: Use the Program field to assign it directly to a program. To ignore this feature, select <none>.
4. Optional: If you're assigning the sample to a program, use the Assign to Pad field to assign it to a
specific pad. Alternatively, just press the pad. To ignore this feature, select Off.
5. Use the Root Note field to select the sample's root note.
6. Optional: Tap and hold your finger on Play to play the sample.
7. Tap Do It to confirm your choice, or Cancel to cancel.
When your loop is done exporting, it will be added to your project's sample pool with the name you
entered and will be assigned to the program and pad you selected (if any).
239