Akai MPC TOUCH User Manual page 133

For time divisions larger than 16, the bar's steps will be represented by
multiple pad banks. Use the left and right arrows (< and >) by the step
numbers (1–16, 17–32, etc.) to change which steps are shown in the
sequencer. The numbers by these arrows indicate which steps are shown.
Alternatively, use Pad Bank Buttons to change which steps are shown.
To adjust the velocities of the steps, do either of the following:
•
Tap anywhere on the velocity bar of a step. The top of the velocity bar will jump to that point.
•
Use the slider on the right to increase or decrease the velocities of all steps.
Use the Nudge arrows (< and >) to shift each step left or right (respectively) one step. This is useful for
experimenting with different rhythmic permutations.
Use the slider on the right to increase or decrease the velocities of all steps.
Use the Invert button (filled-and-empty-squares icon) to switch which steps have notes
entered and which do not have notes. Steps that previously had no notes will now have
notes at full velocity (127). Steps that previously had notes will now be empty.
133