Zoeller 104 Installation Instructions Manual page 4

STEP 1
NOTE: The basin is designed to be installed directly under the sink (Internal Trap) or on the side (standard).
IMPORTANT! Check local and state codes before using the internal trap option.
1.1) Figure 1.1A and 1.1B are typical confi gurations for installation of the drain systems. The actual confi guration will vary
depending on your cabinet and sink confi guration.
NOTE: If installing the internal trap, record the "x" dimension, it will be required in Step 4.
INTERNAL TRAP COMPONENTS SUPPLIED BY OTHERS.
!
PIPING SHOWN ONLY
FOR CLARITY.
PIPING SHOWN ONLY
FOR CLARITY.
Determine Installation Confi guration
Figure 1.1A
INTERNAL TRAP
Figure 1.1B
STANDARD (EXTERNAL TRAP)
© Copyright 2005 Zoeller Co. All rights reserved.
X (4" MIN.)
4
SEE NOTE
SK2001