Table of Contents
Advertisement
1. Read all instructions before beginning installation.
2. Be certain that basin is on a fi rm level surface.
3. Do not use an automatic plumbing vent device.
4. Do not over-torque lid attachment screws.
5. Always use a check valve on the discharge line.
6. Test operation of pump per STEP 6.
1. DO read all installation material included with the pump.
2. DO inspect unit for any visible damage caused by shipping.
Contact dealer if unit appears to be damaged.
3. DO clean all debris from the basin and pump.
4. DO always disconnect pump from power source before
han dling. DO always connect to a separately protected and
prop er ly grounded ground fault protected circuit. DO NOT
ever cut, splice or damage power cord. DO NOT carry or lift
pump by its power cord. DO NOT use an extension cord.
PUMP PERFORMANCE CURVE
104/105/110/115/120/131/132
25
20
6
15
4
10
2
5
0
10
20
GALLONS
LITERS
0
80
Ten Helpful Hints For Easy Installation
Do's And Don't's For Installing A Unit
Performance Characteristics
105/110/
104/132
131
115/120
30
40
50
60
70
160
240
FLOW PER MINUTE
© Copyright 2005 Zoeller Co. All rights reserved.
7. Always provide some means to disconnect basin from
plumb ing for maintenance purposes.
8. Run unit at least once a month to verify proper operation.
9. The model number and date code can be found on the lid
warning label.
10. Plug pump into a properly grounded GFCI receptacle.
5. DO NOT use a discharge pipe smaller than the pump dis-
charge size.
6. DO test pump immediately after installation to be sure that
the system is working properly.
7. DO review all applicable local and national codes and verify
that the installation conforms to each of them.
8. DO NOT install unit in the ground.
MODELS
104/132
Feet
Meters
Gal.
5
1.5
38
10
3.0
30
15
4.6
14
20
6.1
--
Shut-off Head:
18 ft. (5.5m)
009898
80
3
105/110
115/120
Liters
Gal.
Liters
Gal.
144
43
163
72
114
34
129
61
53
19
72
45
--
--
--
25
19.25 ft. (5.9m)
23 ft. (7.0m)
131
Liters
273
231
170
95
Advertisement
Table of Contents
