Cycle Menu - Ikegami LCM-1001 Instruction Manual

1. Press the MENU button and then ▲/▼ button to select the FUNCTION menu.
2. Press the ▶ button and then ▲/▼ button to select the adjustment item you need.
3. Press the ▶ button to active the item.
4. Press the MENU button to move to the previous menu.
LANGUAGE: Select the language: English, French, German, Italian, Spanish.
DEAFULT: Select RESET to set the monitor to the factory default values.
BUTTON LOCK: Select Button lock ON don't work the Front key.
Release the button lock: Push the ▲ and ◀ arrow at the same time for 5 sec then the button is activated.
TRIGGER
- TRIGGER MODE : Set the video input witch will be displayed when trigger signal. (OFF/ ON)
- TRIGGER INPUT : Select the input source of trigger mode. (VIDEO1 / VIDEO2 / S-VIDEO / RGB)
- TRIGGER DWELL : Set the display time period of trigger input when the trigger is detected.
Trigger dwell time duration : 10 seconds to 60 seconds.
■ F. CYCLE MENU
CYCLE SETUP
CYCLE SETUP
CYCLE
VIDEO1
VIDEO2
S-VIDEO
RGB
CYCLE
1. Cycle Time :
Sets the time how long displayed on the screen of cycle on mode from 10 seconds to 30 seconds.
2. Cycle :
If the cycle function is turned on, the selected source keeps changing continuesoly by the period of cycle time
until the cycle function is turned off.
EX) Selected source : Video 1 / Video 2 / S-VIDEO / RGB
Sequence : Video 1 --- (time period) ---
RGB --- (time period) ---
Video 2 --- (time period) ---
Video 1 --- (time period) ---
5
S-VIDEO--- (time period) ---
Video 2 --- (time period) ---
- 13 -
Repeat the cycle.