Table Of Contents - Sartorius CP64 Service Manual

2 |
Page
03 General Information
03 Fundamentals at a Glance
04 The Most Important Information at a Glance
04 Service Concept for the CP/GC/GP Scale/
Balances
04 General Notes
05-06 New Features Compared to the BP
06-07 Models with Special Weighing Systems
08 Auxiliary Service Tools, Equipment and Weights
08 Accompanying Literature
09 Handling and Operation
09 Function of the Keys
09 Displaying the Hardware and Software Versions
10 Function of the Service Switch and Access Lock
Switch
10 Access Lock Switch
11 Brief Instructions Balance/Scale Operating Menu
11-12 Accessing and Setting the Balance/Scale Opera-
ting Menu
13-14 Menu Code Settings(Rel BAC 13.44 Version)
15 Function of the BPI Switch
15 Activating the BPI Mode
16 Testing and Adjusting Balances/Scales with Strain
Gauge Systems
16 Testing and Adjustment Sequence on Balances/
Scales with Strain Gauge Systems
16 Checking the Overload Stop
16 Setting the Overload Stop
17 Zero-Point Offset Adjustment
17 1. Adjustment with a Digital Voltmeter
17 2. Adjustment using the Service Software
(Sartocas / Psion)
18 Checking the Repeatability (standard deviation)
18 Checking and Adjusting the Off-Center Loading
Error
18 Checking the Off-Center Loading Tolerances
19-20 Procedure for Adjusting the Off-Center Loading
Error (Strain Gauge)
21 Span Adjustment
21 External Adjustment
22 Adjusting Linearity
22 Adjusting External Linearity
23 Testing and Adjusting Balances/Scales with Double-
Lever Systems
23 Testing and Adjustment Sequence on Balances/
Scales with Double Lever Systems
23 Checking the Overload Stop
23 Checking the Repeatability (standard deviation)
24 Checking and Adjusting the Off-Center Loading
Error
24 Checking the Off-Center Loading Tolerances
25 Procedure for Adjusting the Off-Center Loading
Error (Double Lever Systems)
26 Span Adjustment
26 External Adjustment
27 Adjusting Linearity
27 Adjusting External Linearity
28 Balance/Scale with Monolithic Weigh Cells
28 Testing and Adjustment Sequence on Balances/Scales
with Monolithic Weigh Cells
28 Checking the Overload Stop
28 Checking the Repeatability (standard deviation)
29 Off-Center Loading Error
29 Checking and Adjusting the Off-Center Loading Error
29 Checking the Off-Center Loading Tolerances
29 Procedure for Adjusting the Off-Center Loading
Error (Monolithic Weigh Cells)
30 3-Point Adjustment
31 Span Adjustment
31 External Adjustment
31 Overwriting the Internal Calibration Weight
32 Internal Span Adjustment
33 Linearity
33 Checking the Linearity
33 Adjusting the Linearity
34 Overwriting the Internal Linearization Weight
35 Balances/Scales with Forked Lever Systems
35 Testing and Adjustment Sequence on Balances/Scales
with Forked Lever Systems
35 Checking the Overload Stop
35 Checking the Repeatability (standard deviation)
36 Off-Center Loading Error
36 Checking and Adjusting the Off-Center Loading
Tolerances
36 Procedure for Checking the Off-Center Loading
Tolerances
37 Procedure for Adjusting the Off-Center Loading
Error (Forked Lever Systems)
38 External Adjustment
39 Linearity
39 Checking the Linearity
39 Adjusting the Linearity
40-41 Error Codes
42-44 Calibration/Adjustment Data
Contents