Installing The Power Inlet Box; Figure 7-4 Removing The Power Inlet Box (Sun Fire V1280 Shown) - Sun Microsystems Sun Fire V1280 Service Manual

Handles
FIGURE 7-4
5. Remove the inlet box using the two handles and place it on an ESD mat.
7.2.2

Installing the Power Inlet Box

1. Insert the power inlet box into the rear of the system and secure the inlet box
using the four Phillips no. 2 screws (
2. Return power to the system by performing one of the following tasks:
If you have a Sun Fire V1280 system, reconnect the four power input cables, AC0
I
through AC4 (
OR
If you have a Netra 1280 system:
I
a. Reconnect the wires to the DC input power lug pairs—DC0/DC1 and DC2/DC3.
b. Close the external circuit breaker.
7-6 Sun Fire V1280/Netra 1280 Systems Service Manual • December 2003
Removing the Power Inlet Box (Sun Fire V1280 Shown)
).
FIGURE 1-3
).
FIGURE 7-4