Service Aids - Motorola CP140 Basic Service Manual

3-2
3.2

Service Aids

Table 3-2 lists service aids recommended for working on the CP100 Series Portable Radios. While all
of these items are available from Motorola, most are standard shop equipment items, and any
equivalent item capable of the same performance may be substituted for the item listed.
Motorola Part
No.
RLN4460 Portable Test Set
RLN4510 Battery Interface
PMKN4004 Programming Test Cable
PMKN4003 Radio to Radio Cloning Cable
RLN4008 Radio Interface Box
5886564Z01 RF BNC Adaptor
0180305K08 Shop Battery Eliminator
EPN4040_ Wall-Mounted Power Supply (UK) Used to supply power to the RIB
EPN4041_ Wall-Mounted Power Supply
(220VAC)
HSN9412 Wall-Mounted Power Supply
(120VAC)
3080369B71 or Computer Interface Cable
3080369B72
HKN9216 IBM Computer Interface Cable
6680702Z01 Knob Remover/Chassis Opener
RSX4043A TORX screwdriver
6680387A70 T6 TORX bit
WADN4055A Portable Soldering Station
6604008K01 0.4mm replacement tip
6604008K02 0.8mm replacement tip
0180386A82 Anti-static Grounding Kit
6684253C72 Straight Prober
6680384A98 Brush
1010041A86 Solder (RMA type)
Test Equipment, Service Aids, and Service Tools: Service Aids
Table 3-2. Service Aids
Description Application
Enables connection to the audio/accessory jack.
Allows switching for radio testing.
Regulates DC current and voltage between radio and
power supply.
Connects radio to RIB (RLN4008).
Allows a radio to be duplicated from a master radio by
transferring programmed data from the master radio to
the other.
Enables communications between the radio and the
computer's serial communications adapter.
Adapts radio's antenna port to BNC cabling of test
equipment.
Interconnects radio to power supply.
Used to supply power to the RIB
Used to supply power to the RIB
Use B72 for the IBM PC AT or newer (9-pin serial port).
Use B71 for older models (25-pin serial port). Connects
the computer's serial communications adapter to the
RIB (RLN4008).
Connection from computer to RIB.
Used to remove the front cover assembly.
Tighten and remove chassis screws
Removable TORX screwdriver bit
Digitally controlled soldering iron
For WADN4055A Soldering iron
For WADN4055A Soldering iron
Used for all radio assembly/disassembly procedures
63/37, 0.5mm diameter, 2.2kg (1lb) spool.