Ptt Re-Assembly - Motorola CP140 Basic Service Manual

8-12 Non-Keypad Model Disassembly and Re-assembly: Disassembling and Re-assembling the Radio — General

8.4.3.5 PTT Re-assembly

1. Place the PTT seal over the ridge around the top hole. Press down to seat the seal around the
ridge.
2. Place the bottom tab in the slot inside the front housing PTT opening. Slightly slide down the PTT
and bow it by placing one finger under the middle of the PTT, so that the top tab can be aligned
and inserted into the top slot
3. Press the PTT assembly against the front cover opening
a. Place bottom tab into bottom slot.
Place top tab into top slot.
(Figure 8-15a).
Figure 8-15. PTT Re-assembly
(Figure 8-15b).
b. Push down on PTT toward bottom
of radio so hooks do not get crushed.