Service Aids; Test Equipment - Motorola GP68 Service Manual

GP68 Portable Radios Service Manual

Service Aids

The following table lists service aids recommended for working on the GP60 Series Radios.
Motorola Part
No.
RTX4005
RKN4034
RVN4159
PMLN4074
PMLN4068
RLN4008
HSN9412
HKN9216
HLN9390
HLN9087
01-80304E45
81-80377E77

Test Equipment

The following table lists test equipment required to service the GP60 Series Radios and other two-way radios.
Motorola
Model No.
R2200, R2400, or R2001
with trunking option
*R1049
*S1100
*S1053, *SKN6009,
*SKN6001
R1053
*S1350, *ST1215 (VHF)
*ST1223 (UHF) *T1013
S1339
*R1013
S1347 or
S1348 (prog)
March, 1997
Description
Portable Test Box
Test Box cable
Radio Service Software
Programming Cable
Radio to Radio Cloning Cable
Radio Interface Box(RIB)
RIB Power Supply
Computer Interface Cable
AT to XT Computer Adapter
External Antenna Adapter Con-
verts RF port to BNC
Battery Eliminator
Housing Eliminator
Description
Service Monitor
Digital Multimeter
Audio Oscillator
AC Voltmeter, Power Ca-
ble for meter, Test leads for
meter
Dual-trace Oscilloscope
Wattmeter, Plug-in Ele-
ments (Vhf & Uhf), RF
Dummy Load
RF Millivolt Meter
SINAD Meter
DC Power Supply
Enables connection to the audio / accessory jack. Allows switching
for radio testing.
Connects radio to Test Box.
Software on 3.5" floppy diskette and manual
Connects radio to RIB.
Allows a radio to be duplicated from a master radio by transferring
programmed data from the master radio to the other.
Enables communications between the radio and the computer's serial
communications adapter.
Used to supply power to the RIB.
Connects the computer's serial communications adapter to the RIB.
Allows HKN9216 to plug into a XT style communications port.
Power and sensitivity measurement
Allows use of Power Supply
Allows component level analysis
Characteristics
This monitor will substitute
for items with an
asterisk *
67 to 200 Hz tones
1mV to 300V, 10-Megohm in-
put impedance
20 MHz bandwidth,
5mV/cm - 20V/cm
50-ohm, + 5% accuracy 10
Watts, maximum 0-1000
Mhz, 300W
100uV to 3V RF, 10 kHz to
1.2 GHz
0-20 Vdc, 0-5 Amps
6881086C09-O
Application
Application
Frequency/deviation meter and signal genera-
tor for wide-range troubleshooting and align-
ment
Two meters recommended for ac/dc voltage
and current measurements
Used with service monitor for injection of PL
tones
Audio voltage measurements
Waveform measurements
Transmitter power output measurements
RF level measurements
Receiver sensitivity
Bench supply for 12.5Vdc
Foreword
Service Aids
xi