Service Aids - Motorola EX500 Basic Service Manual

Service Aids

3.17 Service Aids
The recommended service aids for the EX500, EX600, EX560•XLS and EX600•XLS radios are listed
in Table 3-4. While all of these items are available from Motorola, most are standard shop equipment
items and any equivalent item capable of the same performance may be substituted for the item
listed.
Motorola Part
No.
RLN4460 Portable Test Set
H5177 Customer Programming
Software - Software on CD ROM
AAJMKN4123 Programming Cable/Test Cable
AAJMKN4124 Radio-to-Radio Cloning Cable
RLN4008 Radio Interface Box (RIB)
AAJMKN4125 Battery Eliminator
HHLN4134A BNC Adaptor
5880348B33 BNC to SMA connector
8180384M30 Housing Eliminator
0180357A57 Wall-Mounted Power Supply
3080369B71 Computer Interface Cable
or
3080369B72
6680702Z01 Chassis/Knob Opener
Table 3-4 Service Aids
Description Application
Enables connection to the audio/accessory jack.
Allows switching for radio testing.
Used to program customer option and channel data.
Connects the radio to the RIB (RLN4008).
Allows data from a master radio to be duplicated by
copying programmed data from the master radio to
another compatible radio.
Enables communications between the radio and the
computer's serial communications adapter.
Connects to radio via battery eliminator cable.
Adapts radio's antenna port to BNC cabling of test
equipment.
Monitor RF Signal from antenna connector (for IP67
only)
Interconnects radio to power supply. Provides for
troubleshooting of the radio when the housing is
removed.
Used to supply power to the RIB (120 VAC).
Use B72 for the IBM PC AT. Use B71 for all other
IBM models. Connects the computer's serial
communications adapter to the RIB (RLN4008).
Used to remove and replace surface mount devices.
3-39