9.4
Parameter descriptions
DTM menu path, parameters
<Device> / <Extras>
<Write Protection>
<Device reset>
<Factory reset>
<Device> / <Configuration>
<Sensor / Sensor type>
<Sensor / Connection>
<Sensor / Line resistance>
18 OI/TTR200-EN Rev. B | TTR200
Description
Activates write protection for the entire device
— Yes: locked
— No: unlocked
— Enter password: 0110
Configuration data is reset to factory settings (see "Factory settings" on page 19)
Configuration data is reset to factory settings (see "Factory settings" on page 19).
The adjustment data Trim high / low and DAC adjustment values are also reset to factory settings.
— Yes / OK
Selects sensor type:
— Pt100 (IEC751)
— Pt1000 (IEC751)
— Thermocouple type K (IEC584)
— Thermocouple type B (IEC584)
— Thermocouple type C (ASTME988)
— Thermocouple type D (ASTME988)
— Thermocouple type E (IEC584)
— Thermocouple type J (IEC584)
— Thermocouple type N (IEC584)
— Thermocouple type R (IEC584)
— Thermocouple type S (IEC584)
— Thermocouple type T (IEC584)
— Thermocouple type L (DIN43710)
— Thermocouple type U (DIN43710)
— Thermovoltage –125 ... 125mV
— Thermovoltage –125 ... 1100mV
— Resistance 0 .... 500 Ω
— Resistance 0 .... 5000 Ω
— Pt10 (IEC751)
— Pt50 (IEC751)
— Pt200 (IEC751)
— Pt500 (IEC751)
— Pt10 (JIS1604)
— Pt50 (JIS1604)
— Pt100 (JIS1604)
— Pt200 (JIS1604)
— Pt10 (IMIL24388)
— Pt50 (IMIL24388)
— Pt100 (MIL24388)
— Pt200 (MIL24388)
— Pt1000 (MIL24388)
— Ni50 (DIN43760)
— Ni100 (DIN43760)
— Ni120 (DIN43760)
— Ni1000 (DIN43760)
— Cu10 (OIML R 84), a=4270
— Cu100 (OIML R 84), a=4270
Sensor connection type relevant for all Pt, Ni, Cu resistance thermometers
— Two-wire: sensor connection type in two-wire technology
— Three-wire: sensor connection type in three-wire technology
— Four-wire: sensor connection type in four-wire technology
Sensor line resistance relevant for all Pt, Ni, Cu resistance thermometers with a two-wire circuit
Value range: 0 ... 100 Ω