Parameter Descriptions - ABB TTF200 Operating Instruction

24 TTF200 FIELD-MOUNT TEMPERATURE TRANSMITTER | OI/TTF200-EN REV. A
7.4.1

Parameter descriptions

DTM menu path, parameters
<Device> / <Extras>
<Write Protection>
<Device reset>
<Factory reset>
<Device> / <Configuration>
<Sensor / Sensor type>
Description
Activates write protection for the entire device
— Yes: locked
— No: unlocked
— Enter password: 0110
Configuration data is reset to factory settings (see 'Factory settings' on page 26 )
Configuration data is reset to factory settings (see 'Factory settings' on page 26 ).
The adjustment data Trim high and low and DAC adjustment values are also reset to factory settings.
— Yes / OK
Selects sensor type:
— Pt100 (IEC751)
— Pt1000 (IEC751)
— Thermocouple type K (IEC584)
— Thermocouple type B (IEC584)
— Thermocouple type C (ASTME988)
— Thermocouple type D (ASTME988)
— Thermocouple type E (IEC584)
— Thermocouple type J (IEC584)
— Thermocouple type N (IEC584)
— Thermocouple type R (IEC584)
— Thermocouple type S (IEC584)
— Thermocouple type T (IEC584)
— Thermocouple type L (DIN43710)
— Thermocouple type U (DIN43710)
— Thermovoltage –125 ... 125mV
— Thermovoltage –125 ... 1100mV
— Resistance 0 .... 500 Ω
— Resistance 0 .... 5000 Ω
— Pt10 (IEC751)
— Pt50 (IEC751)
— Pt200 (IEC751)
— Pt500 (IEC751)
— Pt10 (JIS1604)
— Pt50 (JIS1604)
— Pt100 (JIS1604)
— Pt200 (JIS1604)
— Pt10 (IMIL24388)
— Pt50 (IMIL24388)
— Pt100 (MIL24388)
— Pt200 (MIL24388)
— Pt1000 (MIL24388)
— Ni50 (DIN43760)
— Ni100 (DIN43760)
— Ni120 (DIN43760)
— Ni1000 (DIN43760)
— Cu10 (OIML R 84), a=4270
— Cu100 (OIML R 84), a=4270