Using File Upsampling And Conversion; Using Pcm To Dsd Conversion And Upsampling - Cary Audio Design AiOS Owner's Manual

USING FILE UPSAMPLING AND CONVERSION

USING PCM TO DSD CONVERSION AND UPSAMPLING

Pressing the " SRC " button on the hand held remote will cycle through the available sample rates
This can also be accomplished by selecting the desired rate itself rather than cycling through all
rates using the free iOS and Android control apps.
SRC or PCM to DSD function does not work on MQA files as MQA uses its own rendering to render
up to 16x.
How it works:
• When an upsample rate is selected higher than the native input rate, AiOS will upsample all
incoming rates lower than the selected upsample rate up to the selected upsample rate (as
well as change the bit depth to 32 bits for PCM or 1 bit for DSD).
• Any signals played that are equal to or higher than the selected upsample rate will playback
unchanged as evident by the display's "Upsample Rate" showing "BYPASS" or the same
upsample rate as the input rate. Subsequent playback of lower input rates behaves as
described above. Each of AiOS' inputs will remember the upsample rate set for that input.
52