Creating And Editing Playback Lists (Queues); Queue Function - Cary Audio Design AiOS Owner's Manual

CREATING AND EDITING PLAYBACK LISTS (QUEUES)

QUEUE FUNCTION

A Queue is a temporary list of music. This includes all music that is played during a given session,
or manually added to the queue while listening to a Network, USB, or SD Card source. All music
temporarily stored in a queue is specific to that source. All music played during a session is stored
in the Queue with the most current selection being added to the bottom of the list. All music stored
in the queue will be cleared at turn off. To save the Queue, please see Playlists below.
To ADD music to a Queue
Ø Highlight an Album or Track and press the Add button on the remote. A pop-up message
saying "ADD OK" will display confirming the selection has been added to the queue.
NOTE: When in Server Mode, only folders that have only songs within them can be added to
the queue. For example; you cannot add an Artist to the queue in server mode IF there are
album folders within. This is also dependent on the server folder hierarchy as they can vary
from server to server.
To VIEW a Queue
Ø The easiest way is to the Press Queue button on IR remote and the queue list will display.
Ø Alternatively, when pressing the Home button while in Network, USB or SD Card mode, you
can scroll down and highlight the Queue command and press enter. This will display a list of
the songs within or added to the Queue of that source.
UPnP/DLNA Home screen
NOTE: To quickly delete a song from the Queue, simply highlight it and Press the DEL key on
the IR remote. You can also press the DEL key while the song is playing to remove it and skip
to the next track in the queue.
PC Share/SMB Home screen
36