Table of Contents
Advertisement
BLUETOOTH SEND SETUP AND OPERATION
Make sure your Bluetooth headphones/speaker(s) are in Pairing Mode as per their instructions
3.
and Press the down
4.
AiOS will search available Bluetooth devices. Using the
want AiOS to connect to and pres s Enter.
5.
Once the device is connected, the display will show as follows.
6.
Operate AiOS as normal selecting whichever sources you wish to listen to. The AiOS volume will be preset
to 45. Use the volume control on the Bluetooth headphones and speakers to control the volume level.
NOTE: In Bluetooth SEND mode you CANNOT select Bluetooth (INPUT) as a listening source.
7.
When finished using the Bluetooth SEND mode, simply
once again and this screen will appear.
function will turn off. A message will also appear saying "INFORMATION; Main Speaker on".
s
key on the IR remote to "search" and press Enter.
Press Enter on "BT: Connected" and Bluetooth SEND
r
s
keys select the device you
up
, down
Press the Bluetooth Out on the IR remote
47
Advertisement
Table of Contents
