Asap Card Port Numbering; Sfp Modules; Figure 2-9 Asap Port Numbering - Cisco ONS 15600 Series Reference Manual

2.8.7 ASAP Card Port Numbering

2.8.7 ASAP Card Port Numbering
Figure 2-9
Figure 2-9
Module 1
Module 2
Module 3
Module 4

2.8.8 SFP Modules

This section describes the SFPs that provide the fiber interface to the ONS 15600 ASAP card. A line rate
(OC-3, OC-12, OC-48, or Gigabit Ethernet) must be assigned to each SFP in the CTC software interface.
In CTC, SFPs are known as pluggable port modules (PPMs). To provision PPMs, refer to the
Cisco ONS 15600 Procedure Guide.
Table 2-22
Use only SFPs certified for use in Cisco Optical Networking Systems. The qualified Cisco SFP
Caution
pluggable module's top assembly numbers (TANs) are provided in
Cisco ONS 15600 Reference Manual, R7.0
2-24
shows the installed 4PIO modules and corresponding port numbers for each SFP slot.
ASAP Port Numbering
ASAP CC
STAT
LASER ON
SRV
1
ASAP
4PIO
2
4PIO
3
4
1
ASAP
4PIO
2
4PIO
3
4
1
ASAP
4PIO
2
4PIO
3
4
1
ASAP
4PIO
2
4PIO
3
4
lists the SFPs (PPMs) that are compatible with the ASAP card.
Port (PPM Slot) 1-1
Port (PPM Slot) 1-2
Port (PPM Slot) 1-3
Port (PPM Slot) 1-4
Port (PPM Slot) 2-1
Port (PPM Slot) 2-2
Port (PPM Slot) 2-3
Port (PPM Slot) 2-4
Port (PPM Slot) 3-1
Port (PPM Slot) 3-2
Port (PPM Slot) 3-3
Port (PPM Slot) 3-4
Port (PPM Slot) 4-1
Port (PPM Slot) 4-2
Port (PPM Slot) 4-3
Port (PPM Slot) 4-4
Chapter 2 Card Reference
Table 2-22.