Table of Contents
Advertisement
Chapter 9
Management Network Connectivity
you do not need to manually enter static routes for ONS 15600 subnetworks.
network enabled for OSPF. When you are logged into a ONS 15600 node, CTC does not allow both a
DCC interface and a LAN interface in the same nonzero OSPF area.
Figure 9-7
IP Address 192.168.1.100
Subnet Mask 255.255.255.0
Default Gateway = 192.168.1.1
IP Address 192.168.3.20
Subnet Mask 255.255.255.0
Figure 9-8
order for CTC computers on LAN A to communicate with Nodes 2 and 3 because these nodes reside on
different subnets.
Scenario 6: OSPF Enabled
LAN A
CTC Workstation
Host Routes = N/A
ONS 15600 #2
Default Router = N/A
Static Routes = N/A
shows the same network without OSPF. Static routes must be manually added to the router in
Router
IP Address of interface "A" to LAN A 192.168.1.1
IP Address of interface "B" to LAN B 192.168.2.1
Subnet Mask 255.255.255.0
Int "A"
Int "B"
ONS 15600 #1
IP Address 192.168.2.10
Subnet Mask 255.255.255.0
Default Router = 192.168.2.1
Static Routes = N/A
SONET RING
Cisco ONS 15600 Reference Manual, R7.0
9.2.6 Scenario 6: Using OSPF
Figure 9-7
shows the same
LAN B
ONS 15600 #3
IP Address 192.168.4.30
Subnet Mask 255.255.255.0
Default Router = N/A
Static Routes = N/A
9-9
Advertisement
Table of Contents
