Figure 7-8 Single Source Roll; Figure 7-9 Single Destination Roll; Figure 7-10 Single Roll From One Circuit To Another Circuit (Destination Changes); Figure 7-11 Single Roll From One Circuit To Another Circuit (Source Changes) - Cisco ONS 15600 Series Reference Manual

7.13.3 Single and Dual Rolls
Figure 7-8
S1
S2
In Figure
Figure 7-9
S
Figure 7-10
cross-connects on Node 1, Node 3, and Node 4. CTC deletes the cross-connect on Node 2 after the roll.
Figure 7-10
S
Figure 7-11
Figure 7-11
S
S2
Cisco ONS 15600 Reference Manual, R7.0
7-24
Single Source Roll
Node 1
Original leg
New leg
7-9, you can select any available STS on Node 2 for a new destination.
Single Destination Roll
Node 1
Original leg
New leg
shows one circuit rolling onto another circuit at the destination. The new circuit has
Single Roll from One Circuit to Another Circuit (Destination Changes)
Node 1
Node 3
shows one circuit rolling onto another circuit at the source.
Single Roll from One Circuit to Another Circuit (Source Changes)
Node 1
Node 3
Chapter 7
Node 2 D
Node 2
D1
D2
D
Node 2
Node 4 D2
Original leg
New leg
D
Node 2
Node 4
Original leg
New leg
Circuits and Tunnels