Table of Contents
Advertisement
2.6 OC192/STM64 LR/LH 4 Port 1550 Card
Table 2-12
OC48/STM16 SR/SH 16 Port 1310 Card OGI Connector Pinout (continued)
Connector
OGI Pin and Card Port
3
1
Transmit 12 Receive 12
4
1
Transmit 16 Receive 16
2.6 OC192/STM64 LR/LH 4 Port 1550 Card
For card specifications, see the
Note
page
The OC192/STM64 LR/LH 4 port 1550 card provides four long-range, Telcordia GR-253-CORE
compliant, SONET OC-192 ports per card. The ports operate at 9953.28 Mbps over a single-mode fiber.
The OC192/STM64 LR/LH 4 port 1550 card has four physical connector adapters with two fibers per
connector adapter. The card supports STS-1 payloads and concatenated payloads at STS-3c, STS-12c,
STS-24c, STS-48c, or STS-192c signal levels.
2.6.1 OC192/STM64 LR/LH 4 Port 1550 Slots and Connectors
You can install OC192/STM64 LR/LH 4 port 1550 cards in Slots 1 through 4 and 11 through 14. The
card provides four bidirectional OGI-type connector adapters on the faceplate (angled downward),
carrying two fiber strands (one transmit and one receive). Only one transmit and receive pair is used per
connector adapter. On a breakout cable, use port three, fiber 4 (transmit) and fiber 3 (receive).
Cisco ONS 15600 Reference Manual, R7.0
2-14
2
3
Transmit 11 Receive 11
2
3
Transmit 15 Receive 15
A-9.
4
5
Transmit 10 Receive 10
4
5
Transmit 14 Receive 14
"A.2.5 OC192/STM64 LR/LH 4 Port 1550 Specifications" section on
Chapter 2
6
7
Transmit 9
6
7
Transmit 13 Receive 13
Card Reference
8
Receive 9
8
Advertisement
Table of Contents
