Circuit Status; Table 7-2 Ons 15600 Circuit Status - Cisco ONS 15600 Series Reference Manual

Multiservice switching platform (mssp)
Hide thumbs Also See for ONS 15600 Series:
Table of Contents

Advertisement

7.2.2 Circuit Status

Table 7-1
Starting
STS
178
181
184
187
190
7.2.2 Circuit Status
The circuit statuses that appear in the Circuit window Status column are generated by CTC based on an
assessment of conditions along the circuit path.
column.
Table 7-2
Status
CREATING
DISCOVERED
DELETING
PARTIAL
Cisco ONS 15600 Reference Manual, R7.0
7-6
STS Mapping Using CTC (continued)
STS-3c
STS-6c
STS-9c
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
No
No
ONS 15600 Circuit Status
STS-12c STS-18c STS-24c STS-36c STS-48c STS-192c
No
No
No
Yes
Yes
No
No
Yes
No
No
Yes
No
No
Yes
No
Table 7-2
shows the statuses that can appear in the Status
Definition/Activity
CTC is creating a circuit.
CTC created a circuit. All components are in place and a
complete path exists from circuit source to destination.
CTC is deleting a circuit.
A CTC-created circuit is missing a connection or circuit
span (network link), a complete path from source to
destination(s) does not exist, or a MAC address change
occurred on one of the circuit nodes and the circuit is in need
of repair (in the ONS 15454, the MAC address resides on the
AIP; in the ONS 15600, the MAC address resides on the
backplane EEPROM).
In CTC, circuits are represented using cross-connects and
network spans. If a network span is missing from a circuit,
the circuit status is PARTIAL. However, a PARTIAL status
does not necessarily mean a circuit traffic failure has
occurred, because traffic might flow on a protect path.
Network spans are in one of two states: up or down. On CTC
circuit and network maps, up spans appear as green lines,
and down spans appear as gray lines. If a failure occurs on a
network span during a CTC session, the span remains on the
network map but its color changes to gray to indicate that the
span is down. If you restart your CTC session while the
failure is active, the new CTC session cannot discover the
span and its span line does not appear on the network map.
Subsequently, circuits routed on a network span that goes
down appear as DISCOVERED during the current CTC
session, but appear as PARTIAL to users who log in after
the span failure.
Chapter 7
Circuits and Tunnels
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No

Advertisement

Table of Contents
loading

Table of Contents