Table of Contents
Advertisement
Appendix C
Network Element Defaults
Table C-3
ASAP Card Default Settings (continued)
Default Name
ASAP_4.pmthresholds.oc48.sts3c-9c.nearend.15min.NPJC-PDET 60 (count)
ASAP_4.pmthresholds.oc48.sts3c-9c.nearend.15min.NPJC-PGEN 60 (count)
ASAP_4.pmthresholds.oc48.sts3c-9c.nearend.15min.PPJC-PDET
ASAP_4.pmthresholds.oc48.sts3c-9c.nearend.15min.PPJC-PGEN 60 (count)
ASAP_4.pmthresholds.oc48.sts3c-9c.nearend.15min.SES
ASAP_4.pmthresholds.oc48.sts3c-9c.nearend.15min.UAS
ASAP_4.pmthresholds.oc48.sts3c-9c.nearend.1day.CV
ASAP_4.pmthresholds.oc48.sts3c-9c.nearend.1day.ES
ASAP_4.pmthresholds.oc48.sts3c-9c.nearend.1day.FC
ASAP_4.pmthresholds.oc48.sts3c-9c.nearend.1day.NPJC-PDET
ASAP_4.pmthresholds.oc48.sts3c-9c.nearend.1day.NPJC-PGEN
ASAP_4.pmthresholds.oc48.sts3c-9c.nearend.1day.PPJC-PDET
ASAP_4.pmthresholds.oc48.sts3c-9c.nearend.1day.PPJC-PGEN
ASAP_4.pmthresholds.oc48.sts3c-9c.nearend.1day.SES
ASAP_4.pmthresholds.oc48.sts3c-9c.nearend.1day.UAS
C.3 Node Default Settings
Table C-4 on page C-26
the following user-configurable defaults for each Cisco ONS 15600 node:
•
•
•
•
•
•
•
•
lists the node-level default settings for the Cisco ONS 15600. Cisco provides
Circuit settings—Set the administrative state and path protection circuit defaults.
General settings—Set general node management defaults, including whether to use Daylight
Savings Time (DST), the IP address of the NTP/SNTP server to be used, the time zone where the
node is located, the SD path BER value, the defaults description, and whether to report loopback
conditions on Out-of-Service, Maintenance (OOS-MT) state ports.
Network settings—Set default gateway node type, and whether to raise an alarm when the backplane
LAN cable is disconnected.
OSI settings—Set Open System Interconnection (OSI) main setup, generic routing encapsulation
(GRE) tunnel, link access protocol on the D channel (LAP-D), router subnet, and TID address
resolution protocol (TARP) settings.
1+1 protection settings—Set whether or not protected circuits have bidirectional switching, are
revertive, and what the reversion time is.
BLSR protection settings—Set whether BLSR-protected circuits are revertive, and what the
reversion time is, at both the ring and span levels.
Legal Disclaimer—Set the legal disclaimer that warns users at the login screen about the possible
legal or contractual ramifications of accessing equipment, systems, or networks without
authorization.
Security Grant Permissions—Set default user security levels for activating/reverting software,
performance monitoring data clearing, database restoring, and retrieving audit logs.
Default Value
Default Domain
0 - 7200000
0 - 7200000
60 (count)
0 - 7200000
0 - 7200000
3 (seconds)
0 - 900
10 (seconds)
0 - 900
250 (B3 count)
0 - 207360000
200 (seconds)
0 - 86400
40 (count)
0 - 6912
5760 (count)
0 - 691200000
5760 (count)
0 - 691200000
5760 (count)
0 - 691200000
5760 (count)
0 - 691200000
7 (seconds)
0 - 86400
10 (seconds)
0 - 86400
Cisco ONS 15600 Reference Manual, R7.0
C.3 Node Default Settings
C-25
Advertisement
Table of Contents
