Appendix; Connector And Cable Specifications; Connector Specifications; Enet Port - Cisco 575 LRE CPE Installation Manual

Connector and Cable Specifications

This appendix describes the CPE connectors and the cables that you use to
connect the CPE to other devices. See
Figure B-1

Connector Specifications

ENET Port

The ENET port is a 10/100 port that uses an RJ-45 connector with Ethernet
pinouts. The ENET port has the transmit (TD) and receive (RD) signals internally
crossed so that a straight-through cable (included) can be attached to the port.
Figure B-2
78-11469-01
CPE Connectors
PWR
ENET
shows the pinouts.
Cisco 575 LRE CPE Hardware Installation Guide
A P P E N D I X
Figure B-1.
WALL PHONE
B
B-1