Oc192/Stm64 Lr/Lh 4 Port 1550 Card-Level Indicators; Oc192/Stm64 Lr/Lh 4 Port 1550 Network-Level Indicators; Oc192/Stm64 Lr/Lh 4 Port 1550 Card Ogi Connector Pinout; Table 2-15 Oc192/Stm64 Lr/Lh 4 Port 1550 Card Ogi Connector Pinout - Cisco ONS 15600 Series Reference Manual

2.6.3 OC192/STM64 LR/LH 4 Port 1550 Card-Level Indicators

2.6.3 OC192/STM64 LR/LH 4 Port 1550 Card-Level Indicators
Table 2-13
card.
Table 2-13
Indicator
STAT LED
SRV LED
LASER ON

2.6.4 OC192/STM64 LR/LH 4 Port 1550 Network-Level Indicators

Table 2-14
card.
Table 2-14
Indicator
SD LED
SF LED

2.6.5 OC192/STM64 LR/LH 4 Port 1550 Card OGI Connector Pinout

Table 2-15
Table 2-15 OC192/STM64 LR/LH 4 Port 1550 Card OGI Connector Pinout
Connector OGI Pin and Card Port
1 1
—
2 1
—
3 1
—
Cisco ONS 15600 Reference Manual, R7.0
2-16
describes the functions of the card-level LEDs on the OC192/STM64 LR/LH 4 Port 1550
OC192/STM64 LR/LH 4 Port 1550 Card-Level Indicators
Color Description
Red Indicates a hardware fault; this LED is off during normal operation.
Replace the unit if the STAT LED persists. During diagnostics, the LED
flashes quickly during initialization and slowly during configuration
synchronization.
Green The service mode of the card. Green indicates that the card is in use,
amber indicates that the card is out of service, and off indicates that the
card is either booting or has no power applied.
Green The green LASER ON LED indicates that at least one of the card's
lasers is active.
describes the functions of the network-level LEDs on the OC192/STM64 LR/LH 4 Port 1550
OC192/STM64 LR/LH 4 Port 1550 Network-Level Indicators
Color Description
Blue The blue SD LED indicates a signal degrade or condition such as a low
signal level on at least one of the card's ports.
Red The red SF LED indicates a signal failure or condition such as LOS,
LOF, or high BER on at least one of the card's ports. The red SF LED
is also on when the transmit and receive fibers are incorrectly connected.
When the fibers are properly connected, the LED turns off.
lists the OC192/STM64 LR/LH 4 Port 1550 card OGI connector pinouts.
2 3
— Transmit 1
2 3
— Transmit 2
2 3
— Transmit 3
4 5
Receive 1 —
4 5
Receive 2 —
4 5
Receive 3 —
Chapter 2
6 7
— —
6 7
— —
6 7
— —
Card Reference
8
—
8
—
8
—