7.2.5 Circuit Information in the Edit Circuit Window
•
Number of alarms on each node organized by severity
Port service states on the circuit route
•
Alarm state/color of most severe alarm on port
•
Loopbacks
•
Path trace states
•
Path selector states
•
Figure 7-2
Figure 7-2
By default, the working path is indicated by a green, bidirectional arrow, and the protect path is indicated
by a purple, bidirectional arrow. Source and destination ports are shown as circles with an S and D,
respectively. Port states are indicated by colors, shown in
Table 7-4
Port Color
Green
Gray
Purple
Cyan (Blue)
Cisco ONS 15600 Reference Manual, R7.0
7-10
shows a bidirectional STS circuit routed on a path protection.
Path Protection Circuit on the Edit Circuit Window
Port State Color Indicators
Service State
IS-NR
OOS-MA,DSBLD
OOS-AU,AINS
OOS-MA,MT
Chapter 7
Table
7-4.
Circuits and Tunnels