7. SYSTEM MENU
7.3
Response Time
You can set the response time for each data as follows. The input raw data is aver-
aged by the response time.
1. Press the MENU key to open the menu.
2. Use the Cursorpad (
3. Use the Cursorpad (
4. Use the Cursorpad (
key.
5. Use the Cursorpad (
setting. To close the window without saving, press the MENU key (instead of the
ENT key). The setting range is 0 - 12 seconds. The higher the setting, the slower
the response of the display. "0" second means no average.
6. Press the DISP key to close the menu and display the data screen.
7.4
Scale Range
You can set the scale range for the analog meter.
Engine Oil Temperature: 150-250
1. Press the MENU key to open the menu.
2. Use the Cursorpad (
7-4
or
) to select [System] and press the ENT key.
or
) to select [Response Time] and press the ENT key.
or
) to select the menu item desired and press the ENT
or
) to set the value and press the ENT key to save the
°
F
Engine Oil Temperature: 120-300
Example screens
or
) to select [System] and press the ENT key.
°
F