Depth Alarm; Trip/Odometer Alarm - Furuno RD-33 Operator's Manual

4. ALARMS
4.3.5

Depth alarm

The depth alarm alerts you when the depth is lower or higher than the depth setting,
is inside or outside of the depth range setting, or is equal to the depth setting.
1. Open the [Alarms] menu.
2. Use the Cursorpad (
3. Use the Cursorpad (
press the ENT key. When you do not set the depth alarm, select [Off] and go to
step 6.
[Low]: Alarm occurs when the depth is equal to or shallower than the depth set-
ting.
[High]: Alarm occurs when the depth is equal to or deeper than the depth setting.
[Within]: Alarm occurs when the depth is equal to or within the depth range set-
ting.
[Outside]: Alarm occurs when the depth is equal to or outside the depth range
setting.
4. Use the Cursorpad ( ) to move the cursor to the right and press the ENT key.
5. Use the Cursorpad to set the value and press the ENT key. If you selected [Within]
or [Outside] at step 3, set the value for maximum and minimum depth.
6. Press the DISP key to close the menu and display the data screen.
4.3.6

Trip/odometer alarm

The trip/odometer alarm alerts you when your ship has traveled the trip/odometer dis-
tance setting or above.
1. Open the [Alarms] menu.
4-8
or ) to select [Depth] and press the ENT key.
or ) to select [Low], [High], [Within] or [Outside] then
To move the cursor
from minimum item
to maximum item,
use the Cursorpad ( ).
Minimum depth
Maximum depth