Furuno RD-33 Operator's Manual page 26

2. PROGRAMMED SCREEN
4. Use the Cursorpad (
5. Use the Cursorpad (
ENT key.
6. Repeat steps 4 and 5 to set the other options if necessary.
7. Press the DISP key or the MENU key to close the menu and display the data
screen.
How to change the custom layout
1. With the data screen displayed, press the ENT key long.
2. Do steps 4 to 5 at section 2.2.
2-12
E.g. SOG properties window
or ) to select an option and press the ENT key.
Options window
Window examples
or ) to select an option or numeric value then press the
Setting window