Furuno RD-33 Operator's Manual page 32

3. CUSTOM SCREEN
Category
Environment
Auto Pilot
Engine
3-6
Option
Voltage Input voltage
Time (See Current time
section 7.5.)
Date (See Current date
section 7.5.)
Water Temp Water temperature
Air Temp Air temperature
Air Press Air pressure
Humidity Humidity
Wind Chill Wind chill temperature
Dew Point Dew point: Temperature at which
steam starts to be waterdrop
Rudder Rudder angle (S: Starboard, P: Port) Rudder,
Angle
Instance (0, This option does not denote a specif-
1, 2, 3) ic data screen. This number indi-
cates the engine number that
appears on all engine data screens.
Fuel Info Trip fuel used
Fuel Rate Fuel consumption per hour
Engine RPM Engine Revolutions Per Minute
Engine Trim Engine trim angle
Boost Engine boost pressure
Engine Engine temperature
Temp
Engine Total used hours of engine
Hours
Oil Press Engine oil pressure
Oil Temp Engine oil temperature
Coolant Engine coolant pressure
Engine Load Percent engine load
Description Indication
Volts, Voltage
Time
Date
W Temp,
Water Temp
Air Temp
APress,
Air Press
HUMID, Humidity
Chill, Wind Chill
Dew,
Dew Point
Rudder Angle
0, 1, 2, 3
Total, Fuel Info
Rate, Fuel Rate
RPM,
Engine RPM
Trim,
Engine Trim
Boost
E Temp,
Engine Temp
Hours,
Engine Hours
Oil P, Oil Press
Oil, Oil Temp
Coolant
Load,
Engine Load