Ip Address Filter - HIKVISION iVMS-4200 User Manual

2. Select the RTSP Authentication type basic or disable in the drop-down list to
enable or disable the RTSP authentication.
Note:
If you disable the RTSP authentication, anyone can access the video stream by
the RTSP protocol via the IP address.
3. Click Save to save the settings.

10.3 IP Address Filter

Purpose:
This function makes it possible for access control.
Steps:
1. Enter the IP Address Filter interface: Configuration > Advance Configuration >
Security > IP Address Filter
2. Check the checkbox of Enable IP Address Filter.
3. Select the type of IP Address Filter in the drop-down list, Forbidden and Allowed
are selectable.
4. Set the IP Address Filter list.
Network Camera User Manual
Figure 10-5 IP Address Filter Interface
82