Configuring Port Settings - HIKVISION iVMS-4200 User Manual

2. Configure the basic network settings, including the NIC Type, IPv4 or IPv6
Address, IPv4 or IPv6 Subnet Mask, IPv4 or IPv6 Default Gateway, MTU settings
and Multicast Address.
3. (Optional) Check the checkbox of Enable Multicast Discovery, and then the
online network camera can be automatically detected by client software via
private multicast protocol in the LAN.
4. Configure the DNS server. Input the preferred DNS server, and alternate DNS
server.
5. Click Save to save the above settings
Notes:
 The valid value range of MTU is 1280 to 1500.
 The Multicast sends a stream to the multicast group address and allows multiple
clients to acquire the stream at the same time by requesting a copy from the
multicast group address. Before utilizing this function, you have to enable the
Multicast function of your router.
 A reboot is required for the settings to take effect.

7.2 Configuring Port Settings

Purpose:
You can set the port No. of the camera, e.g., HTTP port, RTSP port and HTTPS
port,Server port.
Steps:
1. Enter the Port Settings interface, Configuration > Advance Configuration >
Network >Port
Network Camera User Manual
.
47