Easy Wi-Fi Connection With Wps Function - HIKVISION iVMS-4200 User Manual

increase the security of your product.
Proper configuration of all passwords and other security settings is the

responsibility of the installer and/or end-user.

4.2 Easy Wi-Fi Connection with WPS function

Purpose:
The setting of the wireless network connection is never easy. To avoid the complex
setting of the wireless connection you can enable the WPS function.
WPS (Wi-Fi Protected Setup) refers to the easy configuration of the encrypted
connection between the device and the wireless router. The WPS makes it easy to add
new devices to an existing network without entering long passphrases. There are two
modes of the WPS connection, the PBC mode and the PIN mode.
Note:
If you enable the WPS function, you do not need to configure the parameters
such as the encryption type and you don't need to know the key of the wireless
connection.
Steps:
PBC Mode:
PBC refers to the Push-Button-Configuration, in which the user simply has to push a
button, either an actual or virtual one (as the
interface of the IE browser), on both the Access Point (and a registrar of the network)
and the new wireless client device.
Network Camera User Manual
Figure 4-9 Wi-Fi Settings - WPS
28
button on the configuration