Platform access provides you an option to manage the devices via platform.
Steps:
1. Enter the Platform Access settings interface: Configuration > Advance
Configuration > Network >Platform Access
2. Check the checkbox of Enable to enable the platform access function of the
device.
3. Click Save to save the settings.
7.11 Configuring HTTPS Settings
Purpose:
HTTPS provides authentication of the web site and its associated web server, which
protects against Man-in-the-middle attacks. Perform the following steps to set the port
number of https.
E.g., If you set the port number as 443 and the IP address is 192.168.1.64, you may
access the device by inputting https://192.168.1.64:443 via the web browser.
Steps:
1. Enter the HTTPS settings interface. Configuration > Advance Configuration >
Network > HTTPS.
2. Check the checkbox of Enable to enable the function.
Network Camera User Manual
Figure 7-13 Platform Access
61