2. Check Enable Video Tampering checkbox to enable the video tampering
detection.
3. Set the video tampering area.
4. The default arming schedule for video tampering is 7*24 hours.
5. Check the checkbox to select the linkage method taken for the video tampering.
Audible warning, notify surveillance center, send email and trigger alarm output
are selectable.
6. Click Save to save the settings.
11.3 Configuring Alarm Input
Steps:
1. Enter the Alarm Input Settings interface: Configuration > Advance
Configuration >Basic Event > Alarm Input.
Network Camera User Manual
Figure 11-6 Video Tampering Alarm
Figure 11-7 Linkage Method
91