O
PERATION
Configuration (Standalone)
Use standalone configuration to operate the product without a DMX controller.
Auto Programs
Auto programs allow for dynamic RGBA color mixing without a DMX controller.
1.
Go to the Auto Program main level
2.
Select the desired auto (AUTO1-10) and (Speed 000-255) or custom program (PROGRAM1-10)
You cannot edit any of the auto programs (AUTO1-10); however, you can edit the
custom programs (PROGRAM1-10). See
Edit Custom Programs
This setting allows the programming of up to 30 scenes for each of the 10 customizable programs,
including colors and effects.
1.
Go to the EDIT main level
2.
Select the desired auto program (PROGRAM01-10)
3.
Select the desired scene (SCENE 01–30)
4.
Select the desired color or effect (RED, GREEN, BLUE, WHITE, STROBE, TIME, or FADE)
5.
Select the color or effect value (000–255)
6.
Repeat for the other colors or effects
7.
Return to the scene (SCENE 01-30) level
8.
Repeat the settings of colors and effects for the other scenes
Master/Slave
The Master/Slave mode allows a group of Colorado 3 Solo products (the slaves) to simultaneously
duplicate the output of another Colorado 3 Solo (the master) without a DMX controller.
To set each of the slaves:
1.
Go to the RUN MODE main level
2.
Select SLAVE
To set the master:
1.
Set the running mode to DMX as explained in
2.
Select an auto program as explained in
•
The master is the one that runs a program whether in Auto, or Static Color
mode.
•
Do not connect a DMX controller to the products configured for Master/
Slave operation. The DMX controller may interfere with signals from the
master.
•
The master should be the first product in the daisy chain.
Color Settings
The COLOR setting determines how the Colorado 3 Solo generates the white color based on various RGB
settings.
1.
Go to the SETTING main level
2.
Enter the master access passcode as described in
3.
Select COLOR
4.
Select OFF, RGBW, or UC
•
OFF: When all the RGB faders are set to 255, the output is maximum, although the
resulting white color may not be balanced.
•
RGBW: When all the RGB faders are set to 255, the resulting output is defined by
the configured white color (see White Calibration)
•
UC: When all the RGB faders are set to 255, the output matches that of less efficient
products (Universal Color)
Colorado 3 Solo User Manual Rev. 2
Edit Custom Programs
DMX Control
Auto
Programs, or a static mix of colors
Passcode
for details.
Page 22 of 30