O
PERATION
TOUR Notes
These notes clarify the way the TOUR DMX personality works.
Master Dimmer
•
Channel 1 controls the intensity of the currently projected color.
•
When the slider is at the highest position (100%), the intensity of the output is at maximum.
Red, Green, Blue, and White Color Selection
•
Channels 2 through 5 control the intensity ratio of each of the red, green, blue, and white LEDs.
•
When these channels are at the highest position (100%), the intensity of each color is at maximum
if SETTING > COLOR is OFF.
•
You can combine channels 2 through 5 to create over one trillion colors.
Color Macros
•
Channel 6 selects the required color macro.
•
Channel 6 has priority over channels 2 through 6.
•
Channel 1 controls the intensity of the color macro.
Strobe
•
Channel 7 controls the strobe frequency (not the intensity) of channels 2 through 6.
•
Channel 7 can strobe channels 2 through 5 when not running macros, allowing the individual faders
(R, G, B, and W), as well as channel 1 (D), to control the output intensity.
•
Channel 7 can strobe channel 6 when running macros, allowing channel 6 to select the macro and
channel 1 to control the output intensity
Auto/Custom
•
Channel 8 selects the preset auto programs AUTO01–10 or the custom programs PROGRAM1-10.
•
When activating the custom auto programs PROGRAM1-10, you can control the step time and fade
time using channels 2 and 3, respectively.
•
Channel 8 has priority over channels 2 through 7.
•
Channel 9 controls the speed at which each auto program plays.
Zoom
•
Channel 10 controls Zoom adjustment. This provides options to adjust the beam angle from 8 to 55
degrees.
•
Channel 11 resets the zoom lens to the home position.
Dimmer Speed
•
Channel 12 selects the Dimmer mode and speed. Dimmer mode provides four different options to
simulate the dimming curve of an incandescent lighting product.
•
When dimmer is set to OFF, the changes in the RGBW and master dimmer faders are linear.
•
When dimmer is set to DIM1–DIM4, DIM1 is the fastest dimmer curve and DIM4 is the slowest.
Colorado 3 Solo User Manual Rev. 2
Page 14 of 30