Huawei SmartAX MA5603T Configuration Manual page 1853

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
4.
5.
6.
7.
Issue 01 (2014-04-30)
CTAG Mapping Priority:
-
CTAG Default Priority:
0
Priority Policy
pri
CIR
off
CBS
off
PIR
off
PBS
off
Color Mode
blind
Referenced Status
used
------------------------------------------------
Create VLANs.
huawei(config)#vlan 100,200 smart
transmission from ONU_A to the OLT
Add an uplink port to the VLANs.
Add uplink port 0/0/0 and 0/0/1 to the VLANs.
huawei(config)#port vlan 100,200 0/0 0-1
Create service ports.
For power distribution site information, create service port 2 with SVLAN 200 and traffic
profile 10.
huawei(config)#service-port 2 vlan 200 eth 0/1/1 multi-service user-vlan
untagged
rx-cttr 10 tx-cttr 10
For GOOSE packets, create service port 3 with SVLAN 100, CVLAN 2 and traffic profile
11.
huawei(config)#service-port 3 vlan 100 eth 0/1/1 multi-service user-vlan 2 rx-
cttr 11 tx-cttr 11
Configure the bridging function for GOOSE packets.
a. Disable the unknown multicast suppression function.
Goose packets are unknown multicast packets. Disable the unknown multicast
suppression function on the OLT to ensure that GOOSE packets are not lost.
huawei(config)#vlan service-profile profile-id 10
huawei(config-vlan-srvprof-10)#packet-policy multicast forward
Info: Please use the commit command to make modifications take
effect
huawei(config-vlan-srvprof-10)#commit
b. Enable the bridging function.
huawei(config-vlan-srvprof-10)#user-bridging
enable
Info: Please use the commit command to make modifications take
effect
huawei(config-vlan-srvprof-10)#commit
huawei(config-vlan-srvprof-10)#quit
c. Bind the VLAN service profile to the uplink VLAN.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
: local-
:
:
:
:
: color-
: not
//Create SVLANs for service
17 Electrical Service Configuration
1828