Configuring Ethernet Access Service Ports On Onus - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Configuration Item
ONT ID
PON port
Procedure
Step 1 Configure QinQ VLANs.
Add two VLANs 1000 and 300 on the OLT, set attributes of the two VLANs to QinQ, and add
the upstream port to the two VLANs.
huawei(config)#vlan 1000 smart
huawei(config)#vlan attrib 1000 q-in-q
huawei(config)#port vlan 1000 0/19 0
huawei(config)#vlan 300 smart
huawei(config)#vlan attrib 300 q-in-q
huawei(config)#port vlan 300 0/19 0
Step 2 Configure traffic profiles.
l Add a traffic profile 10 and do not limit rates. Packets transmitted upstream use the priority
(7 by default) copied from the user VLAN. Packets transmitted downstream use the priority
carried by themselves.
l Add a traffic profile 11 and set the assured rate to 20 Mbit/s. Packets transmitted upstream
use the priority (7 by default) copied from the inner VLAN. Packets transmitted downstream
use the priority carried by themselves.
huawei(config)#traffic table ip index 10 cir off priority user-cos 7 priority-
policy tag-in-package
huawei(config)#traffic table ip index 11 cir 20480 priority user-inner-cos 7
priority-policy tag-in-package
Step 3 Configure service ports.
Configure service ports for the synchronization service, OAM service, and voice and data
services of base stations.
huawei(config)#service-port vlan 1000 gpon 0/3/1 ont 1 gemport 12 multi-service
user-vlan
1000 tag-transform transparent rx-cttr 10 tx-cttr 10
port
huawei(config)#service-port vlan 300 gpon 0/3/1 ont 1 gemport 13 multi-service user-
vlan
1001 tag-transform default rx-cttr 10 tx-cttr 10
huawei(config)#service-port vlan 300 gpon 0/3/1 ont 1 gemport 14 multi-service user-
vlan
1002 tag-transform default rx-cttr 11 tx-cttr 11 //Voice and data service port
----End

14.4.3.6 Configuring Ethernet Access Service Ports on ONUs

Add a service port on an ONU and configure an upstream VLAN to make the ONU-to-user
service flows available and create an ONU-to-OLT upstream data channel.
Issue 01 (2014-04-30)
Data
1
PON port: 0/3/1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
14 FTTM Configuration (Base Station Access)
//Synchronization service
//OAM service port
1440