Huawei SmartAX MA5603T Configuration Manual page 1977

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
huawei(config-btv)#igmp policy service-port 1 normal
huawei(config-btv)#igmp policy service-port 2 normal
huawei(config-btv)#igmp user add service-port 1
huawei(config-btv)#igmp user add service-port 2
huawei(config-btv)#multicast-vlan 1000
huawei(config-mvlan1000)#igmp multicast-vlan member service-port 1
huawei(config-mvlan1000)#igmp multicast-vlan member service-port 2
huawei(config-mvlan1000)#quit
Step 21 Configure the VLAN translation policy and service port for the VoD service.
1.
2.
3.
4.
Step 22 (Optional) Configure the PITP function for PPPoE.
huawei(config)#raio-mode common pitp-pmode
huawei(config)#pitp enable pmode
Step 23 (Optional) Configure the DHCP option function for IPoE.
huawei(config)#raio-mode common dhcp-option82
huawei(config)#dhcp option82 enable
huawei(config)#raio-mode common dhcpv6-option
huawei(config)#dhcpv6 option enable
Step 24 Save the configuration on the OLT side.
huawei(config)#save
Step 25 Log in to the Web configuration window.
1.
Issue 01 (2014-04-30)
Configure the mapping relationship between a GEM port and a VLAN.
The service flow of user VLAN 1100 is mapped to GEM port 13 in the ONT line profile.
huawei(config)#ont-lineprofile gpon profile-name ftth
huawei(config-gpon-lineprofile-1)#gem mapping 13 4 vlan 1100
huawei(config-gpon-lineprofile-1)#commit
huawei(config-gpon-lineprofile-1)#quit
Configure the VLAN of the Ethernet port on the ONT.
If the ONT is connected to the STB through Ethernet port 2, add Ethernet port 2 to VLAN
1100.
huawei(config)#ont-srvprofile gpon profile-name ftth
huawei(config-gpon-srvprofile-1)#port vlan eth 2 1100
huawei(config-gpon-srvprofile-1)#commit
huawei(config-gpon-srvprofile-1)#quit
Create a service VLAN and add an upstream port to it.
Add upstream port 0/19/0 to VLAN 1100.
huawei(config)#vlan 1100 smart
huawei(config)#port vlan 1100 0/19 0
Create service flows.
Set the service VLAN to 1100, GEM port ID to 13, and VLAN translation mode to
transparent transmission, and use traffic profile 8.
huawei(config)#service-port 3 vlan 1100 gpon 0/1/0 ont 1 gemport 13
rx-cttr 8 tx-cttr 8 tag-transform transparent
huawei(config)#service-port 4 vlan 1100 gpon 0/1/0 ont 2 gemport 13
rx-cttr 8 tx-cttr 8 tag-transform transparent
Configure the IP address of the PC network adapter to be in the same network segment
with the IP address of the local maintenance Ethernet port on the ONT (default:
192.168.100.1).
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
19 IPv6 Configuration
//For DHCPv4 packets
//For DHCPv4 packets
//For DHCPv6 packets
//For DHCPv6 packets
1952