Installing the Ink Cartridges
<EUVS ink mode>
3-1 .
Hold down
3-2 .
When the message shown below appears on the display screen, release the operation-panel buttons .
SET INK MODE
ECO-UVS WW
Main power switch
Display screen
Press at the
same time
Press at the
same time
4.
Press
.
The sub power switches off automatically .
This completes selection of the ink mode . Go on to the next step, "Affixing the Cartridge-slot Labels" (p . 7) .
6
1. Changes to the Setup Guide
and
, switch on the main power switch .
Gloss mode
Gloss/White mode
Hold down until the message
appears .
White mode
EUVS ink mode
Press at the
same time
Press at the
same time