Installing The Ink Cartridges - Roland LEC-300 Supplemental Manual

Installing the Ink Cartridges

Installing the Ink Cartridges

When installing ink cartridges for the first time, clean the print heads with the cleaning solution, and then fill with ink of each
color . This operation requires four SOL INK cleaning cartridges (two cartridges for LEF-12) .
* Be sure to use fresh SOL INK cleaning cartridges and ink cartridges .
* Never under any circumstances use anything other than the specified type of ink or cleaning fluid .
Be sure to follow the on-screen instructions for
insertion and removal .
- Insert and remove slowly, one at a time .
- Insert firmly, as far as it will go .
- Insert firmly until you hear a beep .
During cleaning, you need to insert and remove cartridges several times . The on-screen messages tell you when or which
cartridge to be inserted or removed . The SOL INK cleaning cartridges are not differentiated by color .
Important
Insert each color ink cartridge into the slot labeled with the matching color . If you insert the wrong cartridges, the color inks
may be mixed . Be careful not to insert the wrong cartridges . Contact your authorized Roland DG Corp . dealer or us, if you
inserted the wrong cartridges and the color inks were mixed .
1. Make the initial settings
1.
Hold down
2.
Use to select the language you want .
8
1. Changes to the Setup Guide
Arrow
* This figure indicates LEC-330 .
and press the sub power switch .
Slot number