Shelf Manager Command Line Interface; Cli Commands - Advantech PAC-4010 User Manual

6.3 Shelf Manager Command Line Interface

The Shelf Manager supports a command line interface in addition to the IPMI defined
interfaces, to grant easy and fast human readable system information. The CLI can be
used for debugging and error recovery as well as showing information about the board
and firmware status.
The Shelf Manager Command Line Interface can be accessed via serial console and
Secure Shell, please see corresponding chapters how to access this interfaces.

6.3.1 CLI Commands

Command
Description
Command
Description
Command
Description
Parameters
Usage
Example
Command
Description
Parameters
Usage
Example
Command
Description
Child cmd
Parameters
Usage
Example
Command
Description
Parameters
Usage
Example
__________________________________________________________________________________________
PAC-4010 User Manual V1.0
help
Display full list of supported commands, including a brief description of
each command.
info
Print system HW/SW version information
raw
Send a raw IPMI message
<IPMI packet> IPMI message
raw <IPMI packet>
raw 0x06 0x01
sensor
Print sensors and sensors readings. This command is also available for
Shelf FRUs
<device address> FRU device address [sensor number] sensor
number
sensor <device number> [sensor number]
sensor 0x20
fru
The fru command combines all fru control commands
status
activate
deactivate
<device> Device address or name [sub fru] Fru number
fru status <device number> [subfru]
fru status 0x82 0
sel
Print system event log (SEL). By adding the parameter clear the
whole SEL will be erased
[clear]
sel
sel
Copyright 2016 Advantech Co. Ltd. All rights reserved.
90
Page