Saving Automatically - wtw Oxi 330i Operating Manual

Operation
Setting the save
interval:
28

4.4.2 Saving automatically

The save interval (Int 1) determines the chronological interval between
automatic save processes.
After the fixed interval has expired, the current data record is transmit-
ted to the storage and to the interface.
The default setting for the save interval (Int 1) is OFF.
By this, the AutoStore function is switched off.
To switch the function on, set an interval (5 s, 10 s, 30 s, 1 min, 5 min,
10 min, 15 min, 30 min, 60 min):
1 Press the <RUN/ENTER> key and hold it down.
2 Press the <STO> key. Int 1 appears on the display.
TDS UpH O
S
1 n t 1
Time Baud
O
8 F
Day.Month No.
Year Ident
Tref25 Tref20 AutoCal DIN
LoBat nLF Lin Cal AutoCal TEC
3 Set the required interval between the saving procedures with
< > < > .


4 Confirm with <RUN/ENTER>.
The number of free memory locations appears on the display.
Sal
mV/pH
% mg/l
m S/
cm
mbar M cm
1/ cm Sal
F
°
C
/
% K
TP
° F
Auto Store
ARng
AR RCL
Oxi 330i/340i