Oxi 330i/340i
Setting the date and
3
Commissioning
3.1
Scope of delivery
l Handheld meter, Oxi 330i or 340i
l Plug-in power supply, optional (340i only)
l Operating manual and short operating manual
l 4 batteries, 1.5 V Mignon type AA (in the instrument)
3.2
Initial commissioning
Perform the following activities:
l Set the date and time
l Connect the plug-in power supply, optional (340i only)
1
Press the <M> key and hold it down.
time
2
Press the <ON/OFF> key.
The display test appears briefly on the display.
3
Press the <RUN/ENTER> key repeatedly until the date ap-
pears on the display.
4
Set the date of the current day with <
5
Confirm with <RUN/ENTER>.
The date (month) flashes in the display.
6
Set the current month with <
7
Confirm with <RUN/ENTER>.
The year appears on the display.
8
Set the current year with <
9
Confirm with <RUN/ENTER>.
The hours flash on the display.
10
Set the current time with <
11
Confirm with <RUN/ENTER>.
The minutes flash on the display.
12
Set the current time with <
13
Confirm with <RUN/ENTER>.
The instrument switches to the measuring mode, the sensor
symbol flashes.
14
Switch the instrument off using <ON/OFF>.
> <
> .
> <
> .
> <
> .
> <
> .
> <
> .
Commissioning
11