Dynamic Equalization - Audison bit one Advanced Manual

DYNAMIC EQUALIZATION

Select the CONFIG / DYNAMIC EQUALIZATION WIZARD
entry from the main menu to access to a unique function
the Bit One software features.
Of course the sound of an audio system varies according
to its reproduction volume.
At low volume the noise coming from the outside of the
car along with the particularly sound-damping acoustics
of the car compartment contribute to limit the system
performance (especially in low frequency).
Generally speaking while tuning the system you need to
take into consideration that the adjustments performed at
low level volume will necessarily change when turning up
the volume.
The Dynamic Equalization improves the listening
impression by positively affecting the variation of the
frequency response when volume varies.
The Wizard will offer a set of screenshots to set the
equalization to apply on the general frequency response.
The Bit One will automatically perform a gradual
interpolation of the data, following the signal level and so
acting according to the system listening volume.
Two operational modes are available:
EASY MODE
Insert a CD into the head unit and play a
reference musical track.
Select the operational mode by clicking
on Easy.
A semi-automatic procedure starts up.
Move the volume cursor by setting the
listening reference level to a low volume.
After adjusting the cursor, press the
START button.
Move the EQ cursor to tune the
equalization of the low volume response
until you get the desired sound. In this
case the equalization curve that will be
entered is pre-set.
Once you have found the right
adjustment press the SAVE button.
Now the reference curve for a low
volume listening level has been entered.
ADVANCED MANUAL / Bit One ADVANCED MANUAL / Bit One
32 32